Professional manufacturer of emergency shower and safety eyewash

About E-mail:funny@sh-gangsheng.com

Please select search: Electrical Heated Freeze Protected Emergency Shower and Eye Wash Station Emergency Shower Room Tank Shower Booth Pedestal Emergency Eye Wash Station Portable Emergency Eye Wash Station Product

Home / Industry news / Characteristics of safety shower and eyewash station
Return

Characteristics of safety shower and eyewash station

Views:743 ClassificationIndustry news Classificationnews

● Main body material: Special SS304 stainless steel conforming to national standards. After acid pickling and passivation treatment, it is more resistant to acid, alkali, salt and oil chemicals than SS304 stainless steel without acid pickling and passivation. The castings are all cast using silica sol technology, and there will be no defects such as sand holes or pores. Compared with the sand casting process, the density and strength are higher and the service life is longer.
●Product features 1: The main pipe and the shower cross tube, the shower cross tube and the shower nozzle elbow are made of seamless steel pipe elbow, which greatly saves installation time and reduces the risk of water leakage at the installation joint.
●Feature 2: The eyewash assembly and the shower water pipe are connected by a union nut, and the direction of the shower nozzle can be adjusted at will according to the installation requirements on site without affecting the tightness of the pipeline. Effectively solve the situation that the common pipe thread connection cannot be adjusted to the ideal installation angle under the pipeline sealing state, and the pipeline cannot be sealed under the ideal installation angle.
●Eyewash switch structure and features: The eyewash switch is sealed with a ceramic sealing surface, and the operating force is small, which is convenient for the user to open quickly, and is more suitable for emergency use. Excellent wear resistance and sealing performance, effective service life of more than 300,000 times. Easy maintenance, no need to disassemble the switch valve body, the valve core can be directly replaced from the side of the switch, effectively reducing the maintenance cost of the user.

Antifreeze compound eyewash

Antifreeze compound eyewash

●Eyewash switch mode: manual, only need to open the eyewash cover when using, clean water is automatically sprayed from the eyewash nozzle, close the eyewash cover after use, and the eyewash switch is automatically turned off. After the eyewash switch is turned on, it will not be turned off automatically by non-human operation.
●Features of shower switch: adopt heavy-duty two-piece switch. The large water-passage diameter can ensure that the shower flow reaches the standard flow. When in use, pull down the shower lever, the shower switch is turned on, and after use, push the lever upward and the shower switch is turned off. The shower switch handle is closed at 45 degrees upwards and turned on at 45 degrees downwards.
●Eye-washing nozzle: The eye-washing nozzle has a built-in multi-layer filter to effectively filter impurities in the water and make the water flow into a foamy water column, which can effectively prevent the impurities in the water or the secondary injury of the injured eye nerves and injured parts due to excessive water flow. The filter is easy to disassemble, easy to clean, and easy to maintain.
●This product is suitable for use in environments where the temperature is higher than 0°C. When using in 0°C and below environment, pay attention to the antifreeze and heat insulation of the pipeline.
●Applicable places: Widely used in nuclear energy, power stations, pharmaceuticals, medical, chemical, petroleum, shipping, electronics, smelting, printing and dyeing, education and scientific research units, industries or fields

Click Cancel Reply

    Classify

    Online servicex

    Service
    Wechat

    Follow on Wechat x

    Top Back to the top