DAAO6615 Electric Heating Eye Washer

1. Features: It adopts electric heater heating method, which is suitable for use in areas where the temperature is lower than 0 degrees, and can effectively increase the temperature of eyewash water by about 15 degrees.
Patented products (utility model patent number ZL 2016 2 0407536.X), counterfeiting must be investigated.
2. Material: The main body is made of 304 stainless steel, the wall thickness of the pipe is 3MM, and the national standard thread of the pipe fitting interface.
3. Shower: Pull down the lever, the shower water is sprayed from the shower basin within 1 second, and the shower flow is adjustable from 90 to 180 liters. Working pressure 0.2-0.4MPA.
4. Eyewash: push the handle, and the aerosol-like eyewash will be sprayed within 1 second. The height and angle of the water are designed according to the proportion of the human face, and the eyewash flow can be adjusted from 12-18L/min. Working pressure 0.2-0.4MPA.
5. Eyewash filter: high-density PP+304 double-layer filter, which can filter impurities in the water, and the water sprayed is in the form of aerosol, hugging and gentle.
6. Ball valve: one-piece ball valve and two-piece ball valve are optional. The two-piece ball valve can make the water flow of the eyewash meet the American standard.
7. Eyewash assembly: 304 castings are made of finishing, of which the 90-degree elbow is made of seamless pipes, without welding seams, and the pipe wall will not burst due to water pressure during use.
8. Base: aluminum alloy die-casting, 304 stainless steel can also be selected.
9. Water inlet and outlet: 5/4 inch thread connection. The height of the water inlet from the ground is 150MM, and the height of the water outlet from the ground is 150MM
10. Heating device: The electric heating device is equipped with a temperature control switch or a fully automatic system to control the heating temperature or start the switch. Constant temperature heater power (antifreeze): 150W, high-power heater power: 10KW, or design power according to demand.
11. Insulation layer: environmentally friendly rubber and plastic materials. Outer layer: Warning yellow PP material, which can resist the corrosion of various chemicals.
12. Voltage and current: AC380V voltage, 25A current.
13. Explosion-proof grade: Exd II BT4 (BT6/CT4/CT6 can be optional)
14. Protection grade: IP54 (IP56/IP65 optional)
15. Evacuation and antifreeze device: The eyewash system has an automatic emptying device to prevent the pipeline from freezing.
16. Gift: Self-luminous luminous safety sign.
17. Performance: It has good performance against acid, alkali, salt, oil and other corrosive solutions.
18. Function: It is used in petroleum, chemical, beverage, pharmaceutical and other industries. When chemical liquids, toxic and harmful substances, and fires splash on the body, face, and eyes of the staff, it can be quickly washed to reduce the degree of harm.
19. Standard: In line with the American ANSIZ358.1.2014 standard.
20. Optional configuration: flange connection; reducing joint; water source filter; flow regulator; ABS coating;
Anti-dry burning system (when the electric heat tracing eyewash device interrupts the water supply, the power supply function of the eyewash device will automatically stop to prevent the system from drying out); the signal is uploaded to the DCS device in the main control room; explosion-proof sound and light alarms; explosion-proof lighting, etc.; also available upon request Set the temperature of the water outlet from the eyewash.
21. Packing specification: wooden case, 1 unit/carton.