DAAO6615-D Anti-freeze Emergency Shower and Eye Wash Station Auto Emptying Foot Pedal

• Model: DAAO6615-D
• Height: 2410mm 
• Material: 304 / 316L stainless steel
• Tube wall thickness: 2.5/3mm
• Working pressure: 0.2MPa-0.6MPa
• Working environment temperature: -5 ℃ -35 ℃
• Water inlet size: NPT 1 1/4 ”
• Drain size: NPT 1 1/4 ”
• Eyewash flow: ≥11.4L / min
• Body flow: ≥75,7L / min
• Main functions: eye wash / flush, automatic emptying, antifreeze
• Standard: ANSIZ 358.1: 2014, EN15154.1 / 2: 2006

The antifreeze-type composite eyewash can use the combination of a valve at the bottom, an automatic reset device, and use gravity to automatically drain water from the pipe after use, thereby avoiding icing in the pipe when the ambient temperature is below zero degrees. which suitable for cold areas where the temperature is below freezing in winter. 

Shower Head

Based on the American standard requirements and our unique design, one time stamping molding shower head have total 94 holes and the edge is half hole which can create the perfect water spay area.

-One time stamping molding
-ABS plastic combine with seamless 304 stainless steel and 3 layers filter
-Eyewash bowl lid linked with eyewash valve. Open the lid will active the eyewash simultaneously.

Pipe &Pull Rod

Good quality 304 stainless steel tube content with more than 8% nickel. Both inside and outside is finished with fine polishing.

Capable of Self-standing and have 4 bolts for extra fix needed

Auto emptying the water in the pipe after use  

Protect the pipe from freeze in the winter and prevent the potential water deterioration

Material Carbon steel + ABS coating.

Non-slip design for the foot pedal

Packing

Wrap with bubble film and packing into the fumigation free wooden crate