In which areas of the enterprise are the rush spray and eye wash devices normally located? (1)

The current safety spray and eye wash device setup can refer to the following regulatory standards: 6.1.7 Workplaces where toxic substances may exist or produce should be equipped with on-site first aid supplies according to the physical and chemical characteristics and hazard characteristics of toxic substances, and set up washing and spraying equipment, emergency exit channels, necessary risk relief areas and weather vane. The leakage area should be set at a low level and have an impervious layer. The leaking substances and flushing water should be centrally incorporated into the industrial wastewater treatment system. 8.3 In workplaces or workshops where chemical burns and acute poisoning caused by absorption through skin and mucous membranes are likely to occur, on-site emergency treatment facilities shall be set up near the workplace according to the occupational hazardous factors that may occur or exist and their hazard characteristics. First aid facilities shall include: shower and eye washing facilities with constant water; Gas protection cabinet; Personal protective equipment; First aid kit or kit and first aid medicine; Stretchers and mounts for patient transport; First aid treatment facilities and emergency rescue communication equipment, etc. 8.3.1 Emergency rescue facilities shall be clearly marked and maintained regularly according to relevant regulations to ensure their normal operation. 8.3.2 Shower and eye washing facilities should be close to the work place where relevant accidents may occur.