In which areas of the enterprise are the rush spray and eye wash devices normally located? (2)

Application scope and setting place

1.0.1 The personal protection emergency system for chemical plants and petrochemical plants includes safety spraying and eye washing, protective masks, emergency oxygen breathing system, special agents, mechanical damage protection, etc. This regulation only provides for the setting of safety spray device and safety eye washing device.

1.0.2 has on the human body has burn (commonly known as corrosion), to human skin (including mucous membrane and eye) stimulation, penetration, easily absorbed by skin tissue and damage internal organs (commonly known as poisonous) chemical chemical plant, to set up the emergency eye spray injector apparatus (used to say security spray injector eyes) of personal protection emergency measures.

1.0.3 Setting the place and location

1.0.3.1 The distance between the setting position of the safety spray eye washer and the possible accident point is related to the toxicity, corrosion and temperature of the chemicals used or produced. The setting point and requirements are usually put forward by the process.

(1) Within the production and use area of general toxic and corrosive chemicals, including loading and unloading, storage and analysis near the sampling point, and the safety spray eye washer shall be set up at a distance of 20^-30m.

(2) in highly toxic, strong corrosion and temperature higher than 70 ℃ of chemicals, acid and alkaline materials, the production and use of areas, including loading and unloading, storage, analysis, sampling point near, you need to set up safety spray injector apparatus, set its location away from the accident place (dangers) 3 m to 6 m, but shall not be less than 3 m, and should avoid the chemical injection direction decorate, So as not to affect its use in the event of an accident. 1.0.3.2 In the chemical analysis laboratory, where there are frequently used toxic and corrosive reagents, and it is possible to cause damage to human body, safety eye spray device shall be set up.

1.0.3.3 Safety eyespray should be set near the battery charging room. 1.0.3.4 The safety spray eye washer should be set on the unobstructed channel. The multi-storey workshop is generally arranged near the same axis or near the exit.