Introduction to eye wash

1: Application situations: in some chemical plants or other environments of enterprise safety production important facilities, equipment intact condition and daily management and maintenance; The good condition of special equipment and storage containers of dangerous goods and the inspection and inspection of them; The construction and implementation of the system for monitoring and warning of major danger sources, risk identification, monitoring and warning and measures shall be carried out in the production and business sites with relatively large risk factors, as well as in key links and positions. In dangerous places, a leak place is equipped with toxic gas detector, eye wash and other pre-checked security equipment.

Preparation of emergency rescue plans and emergency drills; Whether the emergency passage design is reasonable and smooth; Check, prevent and manage the dangerous points around the enterprise or in the process of operation.

2. Functions and Features:

Features: Emergency eye washing function, but also the whole body flushing function.

Manufacturing standard for eye wash :ANSI Z358-1 2014 (US standard)

3. Main technical parameters:

Material: 304 material + green ABS powder spray

Enable mode: Manual (optional).

Performance: Anti corrosion, anti weak acid, alkali, salt solution.

Eye wash flow: water pressure is greater than 0.25MpaG, eye wash flow :12–18 L/min; Shower flow

Quantity: 75.7-180 l/min;

Design pressure: 0.6MpaG; According to customer design requirements: 0.6MpaG –1.0MpaG.

Use method and use of each product

Gently push the eye wash valve with your hand (foot pedal, clamshell and full automatic are selected), and clean tap water will spray out from the eye wash system (automatically open the dust cover). After eye cleaning, close the switch valve and reset the dust cover.

Pull the shower rod down by hand, water from the spray head automatically ejected, after using the valve rod must be reset, close the shower valve.

Eyewash nozzle: A water jet used to clean the eyes and face.

Eye wash dust cover: A dust cover used to protect the eye wash nozzle and prevent dust.

Shower head: A water spraying device used to clean the whole body.

Open and close valve: used to open and close the flow of water valve device, break off push, pedal

Pipe: A device used to direct the flow of water

Filter screen: used to filter the impurities and chips in the water into the eye wash; It is also optional

The colander.

Base: Aluminum alloy, 304, 316, carbon steel, etc., used for fixing eye wash.

Material: 316,304 stainless steel, galvanized pipe, carbon steel, epoxy resin (ABS), PP

Different materials have different anti-corrosion properties.

This eye washer is used in emergency to temporarily reduce the harmful substances to the eyes, face and body

Physical injury, treatment and treatment, follow the doctor’s advice.

6. Product type

Composite eye wash

Vertical eye wash

Wall hanging (table) type eye wash

Portable eye wash

Buried eye wash

Electric heat tracing eye wash

Electric heated eye wash

An overview
Eyewash and shower equipment are emergency rescue facilities used in toxic and hazardous working environment. When the eyes or body of the field operator are exposed to toxic, harmful and other corrosive chemicals, the eye washers can provide emergency flushing or rinsing of the eyes and body with these devices, mainly to avoid further damage to the body caused by the chemicals, but these devices are only preliminary treatment for the eyes and body. Stainless steel eye washers are divided into three types according to their structure: vertical eye washers, wall mounted eye washers and composite eye washers.